Skip to content

NiMH Battery charger DTX-CH-3NiMH Mk1

Description

Only for charging 3 Cell NiMH battery packs such as BP-2 3.6V NiMH Battery.

Limited to 0.5A charging current.

Only use with DC power supply of the following specification: 6V DC output, minimum 1A / 6W output power.

Charger supply plug type: 2.1x5.5mm; center positive.

Only use supplied power adapter with the charger.

Operation states

Red LED = On when charging
Green LED = On when done charging
Blue LED = On when charger is in operational state

Charging procedure

  • Disconnect the charger from the power supply
  • Attach the battery pack to the charger
  • Connect the charger to the power supply, red LED will lit up when battery is charging.
  • After charge is full the green LED will lit up.
  • Disconnect the charger from power supply.
  • Disconnect the battery from the charger.
  • Do not connect or disconnect battery pack from the charger when the charger is being powered!