Skip to content

P1A power supply options

For P1AP/P1AT devices from Moire Labs, these are power supply options.

Options:

The table below describes the individual power supplies:

  • Order code - number in the order codes table
  • Description - type of power supply
  • Number of messages - the number of messages that can be sent by a given type of power supply
  • Operating time - the maximum recommended operating time of the device per battery
Order codeDescriptionNumber of messagesOperating time
C0D-size LiSOCl2 3.6V non-rechargeable battery50 0003 years
C1P1AB-B0-F0 battery module connector50 0003 years
C226650-size 3.3 - 3.6V rechargeable battery10 0003 years
C3External rechargeable NiMH battery BP-210 0003 years

C0

C0 is non-rechargeable battery LiSOCl2 3,6V type LS33600 from SAFT. The battery is able to send data by cadence once every 30 minutes for 3 years, which is the maximum recommended time of use of the battery. When replacing the battery, the back cover of the device must be removed.

C1

C1 is a battery of the same type as C0, but manufactured as an industrial battery pack with reverse polarity protection when replacing the battery. When replacing the battery, the back cover of the device must be removed.

C2

The C2 is a standard 26650 rechargeable LiIon battery. The estimated number of messages per charge is 10,000. When replacing the battery, the back cover of the device must be removed.

C3

C3 je rechargeable battery pack with NiMH batteries. The estimated number of messages per charge is 10,000. It is not necessary to open the device when replacing the battery.

Support

For support please contact your distributor or manufacturer directly via moirelabs.com