Skip to content

P1AT Temperature Sensor Datasheet

Digital temperature transducer P1AT is a telemetry-enabled, battery powered temperature sensor, which is primarily used to measure temperature in distribution pipes of gases or liquids and sending the measured data over the wireless network into centralized measurement systems such as SCADA.

Wireless communication of the transducer is provided utilizing one of the LoRaWAN, Sigfox, Bluetooth, ZigBee (XBee / 805.15.4) or Wi-Fi (2.4GHz, 802.11b/g/n, WPA2)radio technology using various RF frequency spectrums.

Temperature sensor P1AT is designed for precision measurement and wireless transmit of temperature of gases or liquids inside distribution piping.

The sensor uses very sensitive elements to measure temperature in the tip of the probe. This measured information is afterwards transmitted over wireless network to the final system for monitoring, metering or controlling purposes.

The transducer is enclosed in a robust aluminium or stainless steel enclosure. The back cover is made from UV-stabilized ABS-based plastics.

All necessary software to integrate the sensor int your internal environment is supplied with the device including SDKa and APIs. Moire Labs also provides full services in software development to integrate the sensors into any backend system available.

Technical parameters

Maximum measurement range-50 to 400C
Measurement precision0.25% of measured range
this combined precision accounts for non-linearity of measurement, hysteresis and repeatability
Long-term precision stabilityadditional error of less than 0,05% of range per year
Recommended calibration frequencyonce every three years
Power supplyuser replaceable battery or permanent DC power supply
Wireless uplink technology optionsBluetooth, LoRaWAN, Sigfox, XBee, ZigBee, 802.15.4, Bluetooth LE, Wi-Fi (2.4GHz, 802.11b/g/n, WPA2) - see ordering table below
Antenna connectorSMA external threading
Process attachmentM20x1,5; G½; G¼; many other
IP protection grade according to (IEC 60 529) EN 60 529IP 65

Designed and manufactured in Slovakia, EU.

For support please contact your distributor or manufacturer directly via info@moirelabs.com